From 7884e9b19eecc824398f527d62671ba703c4e0da Mon Sep 17 00:00:00 2001
From: cecilkorik <cecilkorik-github@relay.eltanin.net>
Date: Sun, 23 Jun 2024 01:07:02 -0400
Subject: [PATCH] add recent prints

---
 bedclip/bedclip_thin_backhook8.scad         |  76 +++++++++++
 eyepiece_holder/eyepiece_holder.scad        |  35 +++++
 eyepiece_holder/target_aimer.scad           |  59 +++++++++
 m585_battery_door/m585_battery_door.scad    | 135 ++++++++++++++++++++
 m585_battery_door/m585_battery_door_v3.scad | 135 ++++++++++++++++++++
 5 files changed, 440 insertions(+)
 create mode 100644 bedclip/bedclip_thin_backhook8.scad
 create mode 100644 eyepiece_holder/eyepiece_holder.scad
 create mode 100644 eyepiece_holder/target_aimer.scad
 create mode 100644 m585_battery_door/m585_battery_door.scad
 create mode 100644 m585_battery_door/m585_battery_door_v3.scad

diff --git a/bedclip/bedclip_thin_backhook8.scad b/bedclip/bedclip_thin_backhook8.scad
new file mode 100644
index 0000000..ff88917
--- /dev/null
+++ b/bedclip/bedclip_thin_backhook8.scad
@@ -0,0 +1,76 @@
+raild = 64.9;
+railh = 18.5;
+clipt = 5;
+
+module rail_latch(x, y, z, m) { 
+    translate([1.1,0,0]) rotate([0,m*7,0]) difference() {
+        cube([x,y,z], center=true);
+        translate([0*-m,0,10-z]) rotate([0,25*-m,0]) cube([x+1,y+1,z], center=true);
+        translate([4.9,0,0]) rotate([0,-5,0]) cube([x,y+1,z], center=true);
+        //translate([5*-m,0,30.8-z]) rotate([0,5*-m,0]) cube([x+1,y+1,10], center=true);
+        //translate([5*-m,0,30.8-z]) rotate([0,25*-m,0]) cube([x+1,y+1,10], center=true);
+        
+    }
+    
+}
+module back_latch(x, y, z, m) { 
+    
+    union() {
+        translate([0,0,1.251]) translate([1.35,0,-8]) cube([x-0.1,y,z+15], center=true);
+        translate([-3,0,-26.25]) cube([x-0.5,y,3], center=true);
+        translate([-1.85,0,-22.2]) rotate([0,50,0]) cube([x+0.5,y,9], center=true);
+        translate([-1.85,0,-19.6]) rotate([0,30,0]) cube([x-1.5,y,11], center=true);
+        //translate([0*-m,0,10-z]) rotate([0,25*-m,0]) cube([x+1,y+1,z], center=true);
+        //translate([5*-m,0,30.8-z]) rotate([0,5*-m,0]) cube([x+1,y+1,10], center=true);
+        //translate([5*-m,0,30.8-z]) rotate([0,25*-m,0]) cube([x+1,y+1,10], center=true);
+        
+    }
+    
+}
+
+module back_latch2(x, y, z, m) { 
+    
+    union() {
+        translate([0,0,1.251]) translate([1.35,0,-8]) cube([x-0.1,y,z+19], center=true);
+        translate([-3,0,-28.25]) cube([x-0.5,y,3], center=true);
+        translate([-1.85,0,-24.2]) rotate([0,50,0]) cube([x+0.5,y,9], center=true);
+        //translate([-1.85,0,-21.6]) rotate([0,30,0]) cube([x-1.5,y,11], center=true);
+        //translate([0*-m,0,10-z]) rotate([0,25*-m,0]) cube([x+1,y+1,z], center=true);
+        //translate([5*-m,0,30.8-z]) rotate([0,5*-m,0]) cube([x+1,y+1,10], center=true);
+        //translate([5*-m,0,30.8-z]) rotate([0,25*-m,0]) cube([x+1,y+1,10], center=true);
+        
+    }
+    
+}
+
+module rail_clip() {
+    //cube([raild, clipt, railh], center=true);
+    union() {
+        //color([1,0,1,0.2]) translate([raild/2+2,0.1,-5]) back_latch(5,clipt,27,1);
+        translate([raild/2+4,0,-5]) rotate([0,10,0]) back_latch2(5,clipt,27,1);        
+        translate([-raild/2-2,0,-5]) rail_latch(5,clipt,30,-1);
+        translate([2.5,0,railh/2+3.5]) cube([81.5,clipt,7], center=true);
+        
+    }
+};
+
+module hook() {
+  union() {
+      translate([0,0,4.251]) cube([3,3,8.502], center=true);
+      rotate([0, 25, 0]) translate([-1.6,0,0.651]) cube([3,3,5.602], center=true);
+      rotate([0, -45, 0]) translate([1.5,0,-0.51]) cube([3,3,3.502], center=true);
+
+      //translate([0,0,6.5+1.5]) cube([3,3,3], center=true);
+      //translate([5,0,6.5+1.5]) rotate([0,90,0]) rotate([0,0,45]) cylinder(h=7,d1=4.2, d2=1, center=true, $fn=4);
+      translate([4.5,0,8.5+1.5]) cube([12,3,3], center=true);
+  }  
+}
+
+module hooked_rail_clip() {
+    union() {
+        translate([-37.5,3/2,10]) rotate([0,-90,0]) hook();
+        translate([0,clipt/2,0]) rail_clip();        
+    }
+}
+
+rotate([90,0,0]) hooked_rail_clip();
\ No newline at end of file
diff --git a/eyepiece_holder/eyepiece_holder.scad b/eyepiece_holder/eyepiece_holder.scad
new file mode 100644
index 0000000..3b5f06b
--- /dev/null
+++ b/eyepiece_holder/eyepiece_holder.scad
@@ -0,0 +1,35 @@
+real_diam = 35.8;
+real_depth = 17.2;
+fudge = 0.1;
+diam = real_diam + fudge;
+depth = real_depth + fudge;
+detail = 100;
+thickness = 15;
+plate = 150;
+front = 6;
+
+module mock_scope(x, y) {
+    cylinder(h = depth + y, d = diam + x, $fn=detail);
+}
+
+module billet() {
+    union() {
+        cylinder(h = depth, d = diam + thickness, $fn=detail);
+        cylinder(h = depth/front, d = (diam + thickness)*1.8, $fn=detail);
+        translate([-plate/2,-thickness/2,0]) cube([plate, thickness, depth/front]);
+        rotate([0,0,90]) translate([-plate/2,-thickness/2,0]) cube([plate, thickness, depth/front]);
+    }
+}
+
+module product() {
+    difference() {
+        billet();
+        translate([0,0,-thickness]) mock_scope(0,thickness*2);
+    };
+}
+
+
+
+product();
+
+
diff --git a/eyepiece_holder/target_aimer.scad b/eyepiece_holder/target_aimer.scad
new file mode 100644
index 0000000..501ff52
--- /dev/null
+++ b/eyepiece_holder/target_aimer.scad
@@ -0,0 +1,59 @@
+real_diam = 25.8;
+real_depth = 40.2;
+fudge = 0.1;
+diam = real_diam + fudge;
+depth = real_depth + fudge;
+detail = 100;
+thickness = 3;
+plate = 80;
+front = 32;
+focus = 1.2;
+
+module mock_scope(x, y) {
+    cylinder(h = depth + y, d = diam + x, $fn=detail);
+}
+
+module slices() {
+        translate([-diam,-focus/2,0]) cube([diam*2, focus, depth+0.02]);
+        rotate([0,0,90]) translate([-diam,-focus/2,0]) cube([diam*2, focus, depth+0.02]);
+}
+
+module aim_slices() {
+    difference() {
+        slices();
+        translate([0,0,depth-diam/2]) rotate([0,0,45]) cylinder(h=diam/2+2, d1=diam*3.14159/2, d2=focus*3.14159/2, $fn=4);
+        translate([0,0,1.2]) mock_scope(0.01,-diam/2);
+        
+    }
+}
+
+module mock_scope2(x, y) {
+    difference() {
+        mock_scope(x, y);
+        aim_slices();
+    }
+}
+
+module billet() {
+    union() {
+        cylinder(h = depth, d = diam + thickness, $fn=detail);
+        cylinder(h = depth/front, d = (diam + thickness)*1.8, $fn=detail);
+        translate([-plate/2,-thickness/2,0]) cube([plate, thickness, depth/front]);
+        rotate([0,0,90]) translate([-plate/2,-thickness/2,0]) cube([plate, thickness, depth/front]);
+        //inner_cut();
+    }
+}
+
+
+module product() {
+    difference() {
+        billet();
+        translate([0,0,-0.01]) mock_scope2(0,thickness*2);
+    };
+}
+
+
+
+product();
+//mock_scope2(0,0);
+
diff --git a/m585_battery_door/m585_battery_door.scad b/m585_battery_door/m585_battery_door.scad
new file mode 100644
index 0000000..bd13807
--- /dev/null
+++ b/m585_battery_door/m585_battery_door.scad
@@ -0,0 +1,135 @@
+h=42.35;
+d=2.85;
+bd=5.35;
+brad=26.45;
+isec_inc=5;
+isec_off=1;
+hookd = 6;
+batc_to_clipleftguide = 49.45;
+bclipd = 2.0;
+eclipw = 6.0;
+bc_left=12.5;
+
+module baseplate_circle() {
+}
+
+module baseplate_circle_cut() {
+    intersection() {
+        baseplate_circle();
+        
+    }
+}
+
+
+module bclip_ghost() {
+    translate([0,0,6.1]) union() {
+    rotate([0,0,14.6]) cube([49.45, 0.1, 0.1]);
+    translate([49.45*0.966,0,0]) cube([0.1,12.5,0.1]);
+    translate([49.45*0.966,12.5,-5.35]) cube([0.1,0.1,5.35]);
+    }
+};
+
+module bclip_spine_negative_top() {
+    translate([0,0,6.1]) union() {
+    translate([0,-8,0]) rotate([0,0,14.6]) cube([69.45, 15.1, 15.1]);
+    translate([49.45*0.966,0,0]) cube([5.1,12.5,5.1]);
+    }
+};
+
+module bclip_spine_negative_fore() {
+    translate([49.45*0.966,0,0]) cube([15.1,22.5,15.1]);
+}
+
+module bclip_spine_negative_aft() {
+    translate([-10,-2,0]) cube([10,10,10]);
+}
+
+module bclip_spine_old() {
+    rotate([0,0,14.6]) rotate([0,-4.5,0]) cube([49.45, 5.0, 2.1]);
+    
+}
+
+module bclip_spine() {
+    rotate([0,0,11.6]) rotate([0,-6.5,0]) cube([59.45, 5.0, 10.1]);
+    translate([0,0,6.1-4.5]) rotate([0,0,11.6]) cube([59.45, 5.0, 10.1]);
+    
+}
+
+module bclip_spine_bulk() {
+    difference() {
+        bclip_spine();
+        bclip_spine_negative_top();
+        bclip_spine_negative_fore();
+        bclip_spine_negative_aft();
+    }
+}
+
+module bclip_aft_slot_negative_ramp() {
+    translate([0,-1.2,0]) rotate([0,45,0]) cube([8,0.92,8]);
+    //translate([1.5,-0.92,-0.1]) cube([20,0.92,2]);
+}
+
+module bclip_aft_tab_negative_top() {
+    translate([0.9,-15.9199,0.9]) cube([5,15,30]);
+
+}
+
+module bclip_aft_ghost() {
+    translate([0,-0.92,0]) cube([5.0,0.1,0.1]);
+    translate([5.1,-0.921,0]) rotate([0,-90,0]) cube([5.0,0.1,0.1]);
+    translate([1.51,-0.921,0]) rotate([0,-90,0]) cube([1.0,0.1,0.1]);
+}
+
+module bclip_aft_tab() {
+    difference() {
+    union() {
+    translate([-0.1,-6.5,0]) cube([4,8,6.1]);
+    translate([-3 ,-6.5,0]) cube([4,8,6.1]);
+    }
+    bclip_aft_slot_negative_ramp();
+    bclip_aft_tab_negative_top();
+    }
+}
+
+module bclip_fore_tab() {
+    translate([49.45*0.966,10.8,1.6]) cube([5.1,4.1,2.1]);
+    difference() {
+        translate([49.45*0.966+2,10.8,0.81]) rotate([0,-36,0]) cube([3.8,4.1,2.7]);
+        translate([0,0,6.1-6.5]) rotate([0,0,11.6]) cube([69.45, 10.0, 2]);
+    }
+color([0,0,1,0.25]) bclip_fore_ghost();
+    
+}
+
+module bclip_fore_ghost() {
+    translate([49.45*0.967,11.8,6.1-2.0]) rotate([0,-90,0]) cube([2.0,0.1,0.1]);    
+}
+
+module bclip_circular_pad() {
+    difference() {
+    union() {
+    difference() {
+    translate([23.15,-2.5,3.05]) cylinder(h=6.1,r=26.45,center=true,$fn=200);
+    translate([21.15,-2.5,3.05]) cylinder(h=10.1,r=20.45,center=true,$fn=200);
+    translate([13.45, -50, -1.9]) cube([100,100,12]);
+    }
+    translate([8.45, -22, 6.1-6]) cube([5,40,6]);
+    }
+    translate([-10,-50,-1-100]) rotate([0,-5.5,0]) cube([100,100,100]);
+    }
+}
+
+module bclip() {
+    union() {
+        bclip_spine_bulk();
+        bclip_aft_tab();
+        bclip_fore_tab();
+        bclip_circular_pad();
+    }
+}
+
+//color([0,0,1,0.25]) bclip_ghost();
+bclip();
+//color([1,0.3,0,0.25]) bclip_aft_ghost();
+//bclip_aft_slot_negative_ramp();
+
diff --git a/m585_battery_door/m585_battery_door_v3.scad b/m585_battery_door/m585_battery_door_v3.scad
new file mode 100644
index 0000000..bd13807
--- /dev/null
+++ b/m585_battery_door/m585_battery_door_v3.scad
@@ -0,0 +1,135 @@
+h=42.35;
+d=2.85;
+bd=5.35;
+brad=26.45;
+isec_inc=5;
+isec_off=1;
+hookd = 6;
+batc_to_clipleftguide = 49.45;
+bclipd = 2.0;
+eclipw = 6.0;
+bc_left=12.5;
+
+module baseplate_circle() {
+}
+
+module baseplate_circle_cut() {
+    intersection() {
+        baseplate_circle();
+        
+    }
+}
+
+
+module bclip_ghost() {
+    translate([0,0,6.1]) union() {
+    rotate([0,0,14.6]) cube([49.45, 0.1, 0.1]);
+    translate([49.45*0.966,0,0]) cube([0.1,12.5,0.1]);
+    translate([49.45*0.966,12.5,-5.35]) cube([0.1,0.1,5.35]);
+    }
+};
+
+module bclip_spine_negative_top() {
+    translate([0,0,6.1]) union() {
+    translate([0,-8,0]) rotate([0,0,14.6]) cube([69.45, 15.1, 15.1]);
+    translate([49.45*0.966,0,0]) cube([5.1,12.5,5.1]);
+    }
+};
+
+module bclip_spine_negative_fore() {
+    translate([49.45*0.966,0,0]) cube([15.1,22.5,15.1]);
+}
+
+module bclip_spine_negative_aft() {
+    translate([-10,-2,0]) cube([10,10,10]);
+}
+
+module bclip_spine_old() {
+    rotate([0,0,14.6]) rotate([0,-4.5,0]) cube([49.45, 5.0, 2.1]);
+    
+}
+
+module bclip_spine() {
+    rotate([0,0,11.6]) rotate([0,-6.5,0]) cube([59.45, 5.0, 10.1]);
+    translate([0,0,6.1-4.5]) rotate([0,0,11.6]) cube([59.45, 5.0, 10.1]);
+    
+}
+
+module bclip_spine_bulk() {
+    difference() {
+        bclip_spine();
+        bclip_spine_negative_top();
+        bclip_spine_negative_fore();
+        bclip_spine_negative_aft();
+    }
+}
+
+module bclip_aft_slot_negative_ramp() {
+    translate([0,-1.2,0]) rotate([0,45,0]) cube([8,0.92,8]);
+    //translate([1.5,-0.92,-0.1]) cube([20,0.92,2]);
+}
+
+module bclip_aft_tab_negative_top() {
+    translate([0.9,-15.9199,0.9]) cube([5,15,30]);
+
+}
+
+module bclip_aft_ghost() {
+    translate([0,-0.92,0]) cube([5.0,0.1,0.1]);
+    translate([5.1,-0.921,0]) rotate([0,-90,0]) cube([5.0,0.1,0.1]);
+    translate([1.51,-0.921,0]) rotate([0,-90,0]) cube([1.0,0.1,0.1]);
+}
+
+module bclip_aft_tab() {
+    difference() {
+    union() {
+    translate([-0.1,-6.5,0]) cube([4,8,6.1]);
+    translate([-3 ,-6.5,0]) cube([4,8,6.1]);
+    }
+    bclip_aft_slot_negative_ramp();
+    bclip_aft_tab_negative_top();
+    }
+}
+
+module bclip_fore_tab() {
+    translate([49.45*0.966,10.8,1.6]) cube([5.1,4.1,2.1]);
+    difference() {
+        translate([49.45*0.966+2,10.8,0.81]) rotate([0,-36,0]) cube([3.8,4.1,2.7]);
+        translate([0,0,6.1-6.5]) rotate([0,0,11.6]) cube([69.45, 10.0, 2]);
+    }
+color([0,0,1,0.25]) bclip_fore_ghost();
+    
+}
+
+module bclip_fore_ghost() {
+    translate([49.45*0.967,11.8,6.1-2.0]) rotate([0,-90,0]) cube([2.0,0.1,0.1]);    
+}
+
+module bclip_circular_pad() {
+    difference() {
+    union() {
+    difference() {
+    translate([23.15,-2.5,3.05]) cylinder(h=6.1,r=26.45,center=true,$fn=200);
+    translate([21.15,-2.5,3.05]) cylinder(h=10.1,r=20.45,center=true,$fn=200);
+    translate([13.45, -50, -1.9]) cube([100,100,12]);
+    }
+    translate([8.45, -22, 6.1-6]) cube([5,40,6]);
+    }
+    translate([-10,-50,-1-100]) rotate([0,-5.5,0]) cube([100,100,100]);
+    }
+}
+
+module bclip() {
+    union() {
+        bclip_spine_bulk();
+        bclip_aft_tab();
+        bclip_fore_tab();
+        bclip_circular_pad();
+    }
+}
+
+//color([0,0,1,0.25]) bclip_ghost();
+bclip();
+//color([1,0.3,0,0.25]) bclip_aft_ghost();
+//bclip_aft_slot_negative_ramp();
+